(495) 222-16-58, (499) 737-50-00
Главная » Archive » Archiv2013-11-12






Dr. Sc. V.K Starks * JV Varatkova, YP Gladkov, MA Perelomova

* VPO MSTU "STANKIN", Moscow, Russia

LLC "Volgashlif Plus", Rybinsk, Russia

UDC 666.7 FORMING ACCURACY abrasive ceramic compositions thereof ACOUSTIC PROPERTIES

It was established that one of the reasons for failure to comply with the acoustic quality control tool from the abrasive ceramic compositions with high porosity and structural density of the scattering zaformovannyh zagotovok.Na basis of the revealed a close correlation between the density of the original density of the molding material and finished products, and developed mathematical models suggested solution, eliminates the marriage of sound and reduce the cost index of manufacturing high-performance abrasive tools 2.5 raza. Keywords: abrasive ceramic composition, molding composition, grinding wheels, acoustic control, precision molding.


OJ Zadorozhnaya1, Dr. chem. Sciences O.F.Avvakumov2, Dr. Sc. P.O.Habas1, PhD. tehn. Sciences AA Bogaev3

1 Research Tomsk Polytechnic University, Tomsk, Russia

2 Federal State Institution of Science Institute of Solid State Chemistry and Mechanochemistry SB RAS, Novosibirsk, Russia

3 "Engineering Ceramics", Novosibirsk, Russia

UDC 666.7 CERAMICS BASED ON Al2O3 and nano-sized 3Y-STABILIZED ZrO2, obtained by exchange reactions

In the work by mechanochemical exchange reactions in the solid phase synthesized partially yttrium-stabilized zirconia - Y-TZP. From the obtained powder, and the powder of a commercially available stabilized zirconia PSZ YS-5.5 for comparative evaluation samples made of ceramic aluminum oxide and zirconium (Al2O3> 60%). The structure and properties of the samples. Higher physico-mechanical properties and a homogeneous microstructure has a ceramic material obtained by using a partially stabilized ZrO2, synthesized by exchange reactions. Keywords: alyumotsirkonievaya ceramics, partially stabilized zirconia, a method of metabolic reactions, a tetragonal phase, a monoclinic phase, microstructure, mechanical properties.


 Dr. Sc. E.I. Suzdaltsev, A.S Yermolaev

JSC "Obninsk Research and Production Enterprise" Technology "" g. Obninsk, Russia

UDC 666.266.6 Formation of  lithium aluminum silicate crystalline compounds and their properties. Part I.

A review of the system formed in the lithium aluminum silicate crystalline compounds, their structures and areas of stability. Keywords: lithium aluminum silicate (LAS) system, a solid solution of b-eucryptite, solid solution of b-quartz solid solution of b-spodumene.



Dr. Sc. EI Sciences Suzdaltsev, AS Yermolaev

JSC "Obninsk Research and Production Enterprise" Technology ""  Obninsk, Russia

UDC 666.266.6LITIYALYUMOSILIKATNAYA SISTEMA.FORMIROVANIE crystalline compounds and their properties. Part II.

An analysis of the relationship of the crystal structure and composition, and b-eucryptite solid solution quartz-b and b-spodumene to their thermal expansion. Keywords: lithium aluminum silicate (LAS) system, b-eucryptite, solid solution of b-quartz solid solution of b-spodumene, thermal expansion coefficient (TCR).


 Dr. Sc. Sciences MI Ryschenko, Dr. Sc. EJ Sciences Fedorenko EB Dayneko, M.Yu.. Lisyutkina

National Technical University "Kharkiv Polytechnic Institute", Kharkov, Ukraine



Phd. tehn. Sciences Y.A Postnov, D.V Islenyev, PhD. tehn. Sciences E.A.Pavlov, PhD. chemical Sci. N.V.Maltseva, PhD. tehn. Sciences A.I Kirshin

Saint Petersburg State Institute of Technology, St. Petersburg, Russia

UDC 666.7 MECHANICAL ACTIVATION IN SYNTHESIS nickel-containing catalyst

The article provides a comparative analysis of properties of catalysts synthesized without prior activation of nickel compounds with the characteristics of the catalyst compositions prepared including via mechanochemical method aktivatsii.Provedeno systematic study of the properties of nickel catalysts synthesized using as a precursor compound NiCO3 • nNi (OH) 2 • mN2O. The promising combination of carrier main active component and promoter in the catalyst of high performance for the processes of producing hydrogen in the reaction of steam reforming of methanol or metana.Keywords: mechanochemical activation method, silica-alumina, izikohimicheskie properties nickel component of the catalyst.


PhD. tehn. Sciences V.V Peschanskaya, I.A Alexeenko

National Metallurgical Academy of Ukraine, Dnepropetrovsk, Ukraine

UDC 666,972,112: 97.056 Magnesite concrete with mechanically activated matrix components

Experimental study on the effect of mechanical activation of a mixture of sintered periclase and "periclase - alyuminatkaltsievy cement" to change the mineralogical composition of hydrated materials, microstructure and mechanical strength of the low-cement concrete periclase in the early stages of hardening. The results rengenofazovogo and differential thermal analysis, electron microscopy mehanoaktivirovannyh periclase materials and concrete. Installed effect of blocking periclase hydration after co-processing the mixture of periclase and alyuminatkaltsievogo cement vibratory mill. Indices periclase concrete properties in the temperature range 20-1650 ° C. According to the results of the tests periclase low-cement concrete lining lance blowing molten metal manganese received positive rezultaty.Key words: low-cement magnesia concrete matrix component, mechanical activation, a bar, microstructure, performance properties.


Phd. tehn. Sciences M.V Grigoriev, Dr. Sc. S.P.Buyakova, Dr. Sci. S.N Kul'kov

Federal State Institution of Science Institute of Strength Physics and Materials Science Siberian Branch of the Russian Academy of Sciences (RAS IMPA), Tomsk, Russia


The study of the morphology of the particles, the specific surface area and a fine crystalline structure powders of zirconia and titanium carbide subjected to mechanical activation in a ball mill, and the properties of ceramic composite materials on their basis. It was found that the maximum density of the samples after sintering provides not joint and separate machining powders ZrO2 (Y2O3) and TiC. Wherein supplement of 5% TiC provides a minimum porosity of about 1% and a maximum hardness of 12.5 GPa. In the border area between the matrix and the diffusion occurs hardener reacts to form a complex oxycarbide. Keywords: zirconia, titanium carbide, mechanical activation, ceramic composites.


 AA Novohatskaya, PhD. Sci. G.Y Akimov, E.A Janitors, PhD. Sci. N. Tarasenko, Dr. Sci. V.I Kamenev, S.L Sidorov, Z.F. Kravchenko

Donetsk Physical-Technical Institute NAS of Ukraine, Donetsk, Ukraine

UDC 666.7Grain size CERAMICS COMPOSITION (Sm0,5Gd0,5) 0,55 Sr0,45MnO3 ± D at its magnetic properties at temperatures of 30 K

In this work the influence of grain size on the magnetization at 30 K samples of ceramic composition (Sm0,5Gd0,5) 0,55Sr0,45MnO3 ± D, sintered at 1500 ° C. For the first time it found that by varying the sintering conditions and preconditioning powders, ceramics can be obtained with different grain size and the same density. It is shown that an increase in grain size 10 times leads to the appearance and texture of ceramics, as a consequence, significant changes in its magnetic properties. Keywords: manganite ceramic sintering, grain size, structure, and magnetic properties.


O.V Kichkaylo, Dr. Sc. I.A Levitsky

Belarusian State Technological University, Minsk, Belarus

UDC 666.3-13 Heat-resistant ceramic materials SYSTEM Li2O-Al2O3-SiO2

The results of the study on the creation of heat-resistant ceramic materials on the basis of lithium aluminum silicate obtained by slip casting. The features of the structure formation of heat-resistant ceramic in conjunction with physical and chemical properties, phase composition and firing temperature items. Keywords: lithium aluminum silicate system, heat-resistant ceramics, slip casting, phase formation, structure.




Dr. Sc. U.Sh. Shayakhmetov, PhD. tehn. A.R Murzakova, E.A Goncharenko

Bashkir State University, Ufa, Russia

UDC 666,777: 620.173.25TEHNOLOGY of the carbon-composite ceramics

The article presents the technology of carbon-composite ceramic refractory products for continuous casting of steel. Keywords: ceramic composites, steel casting, an inorganic binder, chamotte graphite-locking plug.


 Dr. Sc.  V.K Starkov1, PhD. tehn. Science M.N Kudryash2, J.V Varatkova, Y.P. Gladkov, M.A Perelomova

1 VPO MSTU "STANKIN", Moscow, Russia.

2 of "Whale Story of St. Petersburg", St. Petersburg, Russia

LLC "Volgashlif Plus", Rybinsk, Russia

 UDC 666.7 High structural abrasive ceramic compositions at different microsphere fillers

Estimated manufacturability tool from the abrasive ceramic compositions with high porosity and structural, whose composition is further added as a filler microspheres and alyumosilikata.Ustanovleno corundum, corundum microspheres that reduces the effort of formation of products and volume deformation after firing, saved the set parameters of structure and hardness. Keywords: abrasive ceramic composition, molding composition, grinding, structuring, technology.



Phd. tehn. Sciences K.B Podbolotov1, PhD. tehn. E.M Dyatlova1, PhD. tehn. R.Y Popov1, A.T Volochko2

1 The Belarusian State Technological University, Minsk, Belarus

2 Physico-Technical Institute, National Academy of Sciences of Belarus, Minsk, Republic of Belarus

UDC 666.7 Ceramic coatings for protection of structural elements of heat engineering PLANTS

The results of the study of protective coatings for lining of thermal units using raw kaolin Republic of Belarus. The prospects of the developed ceramic coatings to extend the life of thermal plants and agregatov. Keywords: SHS, coating, refractories, furnace thermal installation.


International Review


 M. Hoffelner, F. Winter, M. Springer, F. Hugel, A. Boer, R. Kokedzhey Lorenz, J.. Dutton

Almatis GmbH, Frankfurt, Germany


News Company

© 2009 ООО "Меттекс"
Заказ, разработка, создание сайтов в студии Мегагруп.
Home Mail Site map